| DOMESTIC RO |
|
|
|
|
|
|
|
|
| RO 35: 3 Stage RO System |
PRICE: £190 inclusive |
|
|
Economical: The simplicity
& quality of the RO35 reverse osmosis system provides pure water at less than 25p per 100 litres
Quick Change : Filters & Membrane just twist & lock into palce, easy
Big Capacity: Witha a 35 GPD membrane and its 10 litre storage vessel it provides enough water for 4 people
Easy to Fit : Full instructions and all parts means its a easy DIY job to install
Running Cost: Low running costs, uses twist-lock filters & membrane
|
|
|
|
| The
RO 35: 3 stage 35GPD RO System (use with water pressures above 40psi) |
The RO35 comes complete with a CP tap, drain connector, 10 litre storage vessel, all the necessary tubes & fittings plus complete instructions. The RO35 is the complete simple, economical answer to your families needs for the purest water available for drinking & cooking.
The complete purification process starts with a 5 micron pre-carbon filter to remove & reduce large particles plus chlorine's, pesticides, VOC's, THM's, and smaller particulates. The TFC membrane then separates out the remaining contamination in the water and this is passed to the drain, while the pure water is stored for use in the 10 litre storage vessel. When you require water the water in the 10 litre storage vessel is immediately available for use. It passes through the third stage filter just before its dispensed via the tap.
To prevent waste the RO is equipped with a "auto shut-off" valve. Sensing when the 10 litre storage vessel is full it shuts down the system preventing un-necessary water going to waste. The moment you open the tap it will re-activate the system to start producing water again, until the 10 litre storage vessel is once again full.
Reverse Osmosis needs decent water pressure (above 40psi) to make it work at an acceptable level of performance.
If you pressure is low then choose a system with a pump. Its also a slow process this is why there is a need for a storage vessel with most systems.
Reverse Osmosis Systems waste a certain amount of water. The contaminants, along with waste water are passed to the drain when the unit is running. However this is far greener solution than the cost & waste in producing bottled water, puting it in plastic containers, transporting it and disposing of the waste, not to mention the actually going to the shops to buy it. |
|
| The RO 35 dimensions |
Dimensions:-
Main RO Unit (filters, membrane & mounting bracket) 410mm high x 310mm wide x 115mm deep
10 Litre Storage Vessel 350mm high x 250mm diam. Tap 240mm high x 130mm reach |
|
|
| The RO 35 Buy-On-Line |
Buy-on-line or call us on 07941521610
Prices are fully inclusive The price you see is the price you pay including a one year warrany & UK maindland delivery. |
| Buy The RO 35 using Google Checkout |
£190.00 |
|
| |
|
|
| Buy New Stage 1 Pre-Carbon Filter (change every 6 months) |
£16.00 |
|
| Buy New Stage 2 35 GPD Membrane (change every 24-36 months) |
£48.00 |
|
| Buy New Stage 3 Post-Carbon Filter (change every 6-12 months) |
£16.00 |
|
|
| |
|
|
|
