DOMESTIC WATER SOFTENERS

CONTACT US

Click Here to Return to Previous Page
SOFTENERS


DOMESTIC

Water Softeners
Fact Sheet

Water Filters
Prices
Cartridges
Fridge Filters
Fact Sheet

RO Systems
Prices
Facts Sheet


Aquatic ROs

Prices

UV
Systems
Prices

LINKS

COMMERCIAL

Softeners
Duplex Softeners
Filtration
Nitrate Removal
Iron Removal
RO for Espresso
Commrcial RO
Industrial RO
UV Systems
pH Correction
De-ioisation

RIO Chillers
Fact Sheets

COMPONENTS

Filter Cartridges
Housings, Brackets,
Clips Etc.
Taps, Valves, Tubes
& Fittings Etc

RO Components


The MD 160 & 260 PRICE: From £540 inclusive delivered
 

Economical: The simplicity & quality of the Fleck water softener valves allows the manufacture of a low cost high spec softener.

Choice of controls: Electronic Time Clock & Metered variants, with the Fleck SXT control valve.

Big Capacity: Water softeners available in two sizes to suit most applications.

Long Life: Tested by Fleck to the equivalent of 30 years use.

 
Fleck SXT Electroinic Meter or Time Clock

SXT Electronics with a simple to use interface means setting up is easy, all you need to do is set the time & input the hardness by using the easy to use buttons on the face of the water softener. However under the surface at the heart of the SXT the meter & ICs are constantly updating the memory as to your water use, calculating the best day to regenerate and saving you money. The led read out constantly provides a visual indication of the time of day & remaining capacity plus indicators showing service & flow. The special design of the MD 160 & 260 water softeners provides on average a 30% regen water saving over standard metered water softeners. All contained within a one piece rotationally molded robust cabinet with a large salt lid for easy filling. The electronic time clock version can be preset for days between regenerations for sitiuations where wataer use is constant.

Setting up is easy, you set the time of day and set the hardness of your water (test kit included) with simple up and down buttons on the contol face.

The MD 160 & 260 dimension, specifications & prices
   
 

SIZE

MD160

MD260

 

Height:

543mm

632mm

Depth:

450mm

450mm

Width:

277mm

277mm

People @ 300ppm

Up to 5

Up to 8

Salt used per regen

1.0 kg

2.4 kg

Water used per regen

90 litres

90 litres

Maximum flow rate

45 l/p/m

60 l/p/m

Capacity @ 300ppm

1341 lit

2950 lit

Salt storage

20 kg

30 kg

PRICE (SXT TC) £ 540 £ 550
PRICE (SXT Metered) £ 600 £ 650
 

 

 

Included with this softener:
Water test kit, Drain hose, Overflow hose.

Installation kits available with this softener:

Installation kit with: 15mm 3 valve installation kit with flexible hoses add £35
Installation kit with: 15mm 3 valve installation kit with flexible hoses add £45 (full bore)
Installation kit with: 22mm 3 valve installation kit with flexible hoses add £55 (full bore)
Installation kit with: 15mm flexible hoses only add £25
Installation kit with: 22mm flexible hoses only add £30
Installation kit with: 22mm 3 valves for rigid pipe-work add £40 (full bore)

Flow Rate Information:

Different sized connections to your softener will affect the rate of water flow. The best flows are achieved with rigid pipe work, this offers the least resistance to the water. Using flexible hoses reduces the flows as the internal bore is smaller than that of rigid pipe work. In most cases such as homes with Combi Boilers & Gravity Fed (tanks in the roof) systems hoses a quite adequate, however on installation with Megaflow type systems where the highest flow rates are required the best results will be achieved by using rigid pipe work.

Standard hoses 18 litres per min, 15mm pipe 27 litres per min, 22mm Hoses 45 litres per min, 22mm pipe 50 litres per min

Domestic Softeners - Domestic Filters - Domestic RO Systems - Domestic UV Systems - Filter Cartridges
Links - Chillers - Housings - Brackets - Clips - Taps - Valves - Tubes - Fittings - RO Components