| SOFTENERS |
| 
|
|
|
|
|
|
|
|
| The
Twin Tank 1000T |
PRICE: £645 inc vat & delivery |
|
|
Economical: The simplicity
& quality of the Fleck water softener valve with the
addition of electronic control with Duplex operation.
Fully Electronic: Fully electronic
metered system with superior economy.
Big Capacity: A water softener
for the larger household or small commercial application.
Long Life: Tested by Fleck
to the equivalent of 30 years use.
Space Saving: Two part construction.
Suitable for Gravity fed & Combi boiler installation. |
|
| |
| The
TWIN TANK 1000T |
|
Twin Tank softener for 24/7 continuous soft water. Its
compact size & separate brine/salt allow it to fit in
confined or restricted spaces. The brine/salt tank can even
be located in a different location to the main softener,
up to 3 meters away.
The unique Fleck 9100SE Electronic duplex ewater softener
valve offers large capacities with electronic metered control,
because the softener uses 100% of the capacity before switching
to the second tank there is no waste of salt & water
used during the regeneration. Saving on average 15% over
a conventional single tank softener.
Like all of our Fleck water softener valves the 9100SE
is manufactured from high-tech Noryl engineered & tested
to the equivalent of 30 years of uninterrupted daily use.
|
|
|
| |
| The TWIN TANK 1000T dimensions,
specifications & prices |
| |
|
|
|
|
|
|
|
|
|
Height: Softener |
|
540 mm |
|
|
| |
Depth: Softener |
|
440 mm |
|
|
| |
Width: Softener |
|
305 mm |
|
|
| |
Height: Brine/salt tank |
|
350 mm |
|
|
| |
Depth: Brine/salt tank |
|
375 mm |
|
|
| |
Width: Brine/salt tank |
|
175mm |
|
|
| |
People @ 300ppm |
|
n/a |
|
|
| |
Salt used per regen |
|
700 grams |
|
|
| |
Water used per regen |
|
25 litres |
|
|
| |
Maximum flow rate |
|
40 l/p/m |
|
|
| |
Capacity @ 300ppm |
|
680 litres |
|
|
| |
Salt storage |
|
15 kilos |
|
|
| |
Buy On-Line or give us a call |
|
|
|
|
Included with this softener:
Water test kit, Drain hose, Overflow hose.
Select your softener from the list below by clicking on the drop down list for optional/additional installation kits and then click the "Buy Now" button on the right . This softener is in stock and is normally delivered within 7 working days of order.
Installation kits available with this softener:
Installation kit with: 15mm 3 valve installation kit with flexible hoses add £20
Installation kit with: 15mm 3 valve installation kit with flexible hoses add £30 (full bore)
Installation kit with: 22mm 3 valve installation kit with flexible hoses add £35 (full bore)
Installation kit with: 15mm flexible hoses only add £15
Installation kit with: 22mm flexible hoses only add £20
Installation kit with: 22mm 3 valves for rigid pipe-work add £30 (full bore)
|
|
|
|
|
|
|
|
|
|
|
Flow Rate Information:
Different sized connections to your softener will affect the rate of water flow. The best flows are achieved with rigid pipe work, this offers the least resistance to the water. Using flexible hoses reduces the flows as the internal bore is smaller than that of rigid pipe work. In most cases such as homes with Combi Boilers & Gravity Fed (tanks in the roof) systems hoses a quite adequate, however on installation with Megaflow type systems where the highest flow rates are required the best results will be achieved by using rigid pipe work.
Standard hoses 20 litres per min, 15mm pipe 25 litres per min, 22mm Hoses 35 litres per min, 22mm pipe 40 litres per min |
|
|
